Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Angeles
Gate installation in Los Angeles runs $2,800-$9,600 for a typical automated driveway gate, depending on the gate style, operator, and whether the old posts can be reused. Most installations in Los Angeles take one to two days on site, and the written price is handed to you before any work starts. If you’re searching for a Gate Installation in Los Angeles crew that documents what it installs and stands behind it for a full year, call (213) 674-2473 and ask for Adrian Vance.
We’ve worked on gates from San Pedro to Sylmar. The job in Los Angeles is rarely just hanging a gate. It’s figuring out whether the posts are set in expansive clay, whether the hillside grade demands a cantilever slide instead of a swing, and whether LAFD will flag the operator without a Knox Box. That’s the work we do every week. We price it in writing, we photograph what we found, and we leave you with a record you can hand to any future technician.
Key Takeaways:
- Written price before any work begins, under Haven Standard Clause 1.
- 365-Day Done Right Promise on every installation.
- Documented photo record on every visit, at no additional charge.
- Nine automation brands serviced, including DoorKing, Linear, and Viking.
Why Vance Gate Repair Los Angeles Is Los Angeles’s Preferred Gate Installation Company
Adrian Vance started in commercial access-control work in 2014, and that habit of documentation carried over to residential gates. Every install in Los Angeles leaves with a wiring diagram, photos of the motor and sensor placement, and a written record of the part numbers installed. You won’t hand the next technician a mystery. You’ll hand them a file.
Los Angeles customers call us because the phone answers at 2 a.m. with a live person, not a callback queue. A named, background-checked, uniformed technician is dispatched with their photo sent before arrival. That matters in Los Angeles, where gate installs often happen on properties with steep driveways, mature landscaping, and neighbors who ask questions.
We carry DoorKing, Linear, and Viking operator boards and parts in our Los Angeles stock, which means a slide gate install in the Hollywood Hills or a swing gate replacement in Sherman Oaks doesn’t stall while a part ships from a distributor. The written price you get before work starts is the price you pay. The 365-Day Done Right Promise means if the gate isn’t right within that window, we make it right. No argument, no fee.
Our Gate Installation Services in Los Angeles
We install and retrofit the full range of residential and light commercial gates across Los Angeles. What we recommend starts with what the driveway actually does: its grade, its soil, its exposure to wind, and its distance from the fire zone map.
Driveway Gate Installation in Los Angeles
Automated driveway gates are more common per property in Los Angeles than almost anywhere in the country. The difference between a good install and a call-back is the foundation. In Los Angeles, posts set in expansive clay without proper depth or sleeving will move after one wet winter. We set posts below the shrink-swell zone and photograph the hole before the concrete goes in.
Pedestrian Gate Installation in Los Angeles
Homes built in the 1920s through the 1940s in Hancock Park and Los Feliz often have ornate wrought-iron pedestrian gates hung on soft mortar. The gate is beautiful; the substrate is not. We install anchor plates and fresh hinges where needed, and we match the hardware so the gate looks original even when the structural work is new.
Sliding Gate Installation in Los Angeles
Steep hillside driveways in Laurel Canyon, Bel Air, and the Hollywood Hills usually can’t take a swing gate. The grade is too steep. A cantilever slide gate rides on a track and doesn’t drag across the pavement, which is why it’s the default on Los Angeles hillsides. The critical work on a slide gate install here is rail alignment. We set the track true, verify rack and pinion engagement, and photograph the final alignment so wind-related drift can be caught early.
Swing Gate Installation in Los Angeles
Swing gates are the standard on flatter Los Angeles lots, and the question is always the hinges and the posts. A 400-pound steel gate on undersized hinges will sag within 18 months, especially after the ground cycles through rain and dry. We size the hinges and posts for the actual weight of the gate, not the weight the previous gate happened to be.
For the full scope of what we do, see our Gate Installation team’s service page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Los Angeles
A gate installation in Los Angeles should work with the motor that’s right for the property, not the motor a company happens to sell. We service and install nine major automation brands, including Viking, Linear, DoorKing, and Ghost Controls. That means if your hillside property needs a Viking slide operator with a high-torque drive and a Solar Panel Kit for the shaded side of the lot, we can source it and install it. We keep common operator boards and safety photo-eyes in Los Angeles stock, so the part you need on a Friday in Van Nuys isn’t a Tuesday delivery away.
Common Gate Installation Problems We See in Los Angeles Homes
- Post footings that move with the soil. Expansive clay in the San Fernando Valley shifts after winter rains. A newly installed swing gate drags on the latch side within two seasons if the footing wasn’t sleeved below the shrink-swell zone.
- Missing entrapment protection on pre-2016 gates. Los Angeles has thousands of gates hung before UL 325 compliance was standard. A motor swap on one of these often triggers a required safety upgrade the homeowner didn’t expect.
- Santa Ana wind damage on slide gates. Cantilever tracks bend when an unsecured gate slams against the end stops in 60 mph gusts. Operators burn out trying to hold position against sustained wind load.
- Coastal corrosion on steel hardware. Marine-layer salt air from Santa Monica to Malibu corrodes frame pins and latch hardware within 18 months on new installs. Galvanized or aluminum hardware and sealed bearings matter on the coast.
We replaced a 1980s swing gate operator in Bel Air where the original phone-entry system had died and the hinge posts were pulling out of decomposed granite. The client assumed a new motor would fix it. Our tech found the rack and pinion had been chewing through the drive gear for years and the post footings were cracked past repair. We cut and repoured the hinge posts, installed a LiftMaster LA400 with a fresh safety photocell and Knox Box, and reprogrammed the keypad entry. The owner said the gate now runs quieter than any gate he’s had in 30 years.
Pricing for Gate Installation in Los Angeles, CA
Here are the numbers we quote most often in Los Angeles. Every price below includes the written quote before work starts and the documented photo record when the job is done.
| Installation Type | Typical Los Angeles Price Range |
|---|---|
| Single swing gate with operator (basic steel or aluminum) | $2,800 - $5,400 |
| Double swing gate with operator | $4,200 - $7,800 |
| Cantilever slide gate with operator (hillside grade) | $5,500 - $9,600 |
| Pedestrian gate with keypad or card reader | $1,800 - $4,100 |
| Full replacement including new posts and footing work | $6,000 - $12,000 |
What moves the Los Angeles price is the foundation. Reusing an existing post that’s still true is cheaper than cutting and repouring a footing below the clay line. A cantilever slide on a Bel Air hillside costs more than a swing gate on a flat Huntington Park lot because the track, the operator, and the grade work are all heavier. You get the written price before we start. If an existing quote from another company looks off, bring us the paperwork and we’ll give you a free second opinion.
Call (213) 674-2473 for a free estimate on your Los Angeles gate installation.
We Also Serve Cities Near Los Angeles
From our Los Angeles office, we dispatch crews to Huntington Park, Gardena, Inglewood, and Hawthorne for gate installation and repair. If your property sits in one of those cities, the same written-price guarantee and 365-Day Done Right Promise applies. Call (213) 674-2473 and ask if we cover your street.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Angeles
Under Los Angeles Municipal Code Section 91.6305, any new or replacement automatic vehicular gate must meet current UL 325 entrapment protection standards, regardless of whether you’re only replacing the operator. That means photo-eyes, contact edges, or both must be added if your pre-2016 gate doesn’t have them. Los Angeles Fire Department inspectors will not sign off a permit on a Hillside-area gate without a functioning Knox Key Switch or key box override either. Call (213) 674-2473 and we’ll tell you exactly what your gate needs to pass.
A cantilever slide gate rides on a fixed track and presents a narrow profile to the wind, so a 60 mph gust pushes against the edge of the leaf rather than the full face. A swing gate acts like a sail, and the wind loads the hinges and the operator every time the gate is closed. The failure mode in the Hollywood Hills is bent slide tracks from unsecured gates slamming against end stops, which is a repairable alignment issue; the failure mode on swing gates is sheared hinge bolts and burned-out operators, which is a replacement job. We stock spare Viking and LiftMaster boards specifically for the fall and early winter Santa Ana season.
Los Feliz’s deep canyon shade and mature oak canopy cut solar panel output enough that a standard solar opener battery will die mid-cycle regularly. A solar gate opener there only works if the panel is mounted high and clear of the tree line, with a properly sized deep-cycle battery. On heavily shaded Los Feliz driveways we usually recommend a low-voltage AC run or a hybrid panel with a larger reserve battery. Call us for a site check and we’ll show you the math in writing.
Expansive clay soil in Sherman Oaks shrinks and swells with the wet-dry cycle. If the new hinge posts were set in a shallow footing without a sleeve extending below the shrink-swell zone, the ground moves and the gate drags within two seasons. The old gate lasted because its posts happened to be set deeper and the soil had stabilized around them. We sleeve the footing and photograph the depth before the concrete pour, because if the post isn’t documented below the clay line, nobody can verify the work later.
No. LAFD Knox Box requirements apply only within designated Fire Hazard Severity Zones, which cover most hillside neighborhoods and very few flatland areas like Hancock Park. However, any automatic vehicular gate installed or retrofitted in Los Angeles must still meet UL 325 entrapment protection standards, which apply everywhere in the city, not just the fire zones. Call (213) 674-2473 and we’ll check your address against the city’s fire zone map before you spend money on hardware you don’t need.
Written by Adrian Vance, Owner at Vance Gate Repair Los Angeles, serving Los Angeles since 2014.