Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood runs between $1,800 and $6,500 for most driveway gates, depending on the gate style, material, and whether you need a new operator and safety edges. A basic pedestrian gate starts around $900, while a full sliding security gate with automation typically lands between $4,000 and $8,500. Those are the numbers we write down and hand you before anyone picks up a tool. Call (213) 674-2473 and we’ll come measure, spec it, and put the price in writing the same day.
We know North Hollywood because we work here constantly. The post-WWII bungalows off Burbank Boulevard, the ranch homes west of Vineland, the apartment buildings along Chandler, the hillside streets above Magnolia. Each block has its own gate problems, and we know which ones you’ll find before we arrive.
Why Vance Gate Repair Los Angeles Is North Hollywood’s Preferred Gate Installation Company
North Hollywood homeowners don’t call us because we’re charming. They call because we hand them a written price before any work starts, and we leave behind a photo record of everything we found, adjusted, and installed. That’s the Haven Standard, and it’s the reason a lot of NoHo residents who started with a repair now call us for full installations.
Adrian Vance started this company in 2014 doing commercial access-control work. That’s where the documentation habit came from: commercial clients want wiring diagrams, limit-switch readings, and photographic evidence. We brought that same discipline to residential gate installation in North Hollywood. Every job, from a simple pedestrian gate to a double swing driveway gate with an operator, leaves you with a written scope, a documented photo log, and a flat price you agreed to before the work began.
We answer the phone live, 24 hours a day. When you call about gate installation in North Hollywood, you talk to a person, not a voicemail tree. You’ll get the name and photo of the technician before arrival, and that tech will be background-checked and in uniform. Our crews work out of our Los Angeles dispatch office and serve North Hollywood locally, usually within one to two hours for estimates.
Our Gate Installation Services in North Hollywood
Driveway Gate Installation
Most North Hollywood driveway gates are swing-style iron or steel, mounted on columns that date to the original 1940s or ’50s construction. We install new driveway gates with proper standoffs, reinforced hinge points, and if you need automation, we run the operator wiring, set the limits, and test the safety entrapment protections. You get a written part list and a photo record before we leave.
Pedestrian Gate Installation
A side yard pedestrian gate in North Hollywood often has to close securely against an older cinder block wall or a stucco frame that’s settled over decades. We build and hang pedestrian gates that latch cleanly, with hardware sized for the climate: stainless fasteners, sealed bearings, and hinges that won’t seize after three summers of 105°F heat.
Sliding Gate Installation
Sliding gates are common on North Hollywood apartment complexes and newer hillside properties. The Valley’s Santa Ana winds catch a sliding gate broadside and stress the track, the wheels, and the frame, so we specify heavier-gauge steel and set the track on a concrete pad with proper drainage. For automated sliding gates, we install safety photocells and a reversing edge as standard, not as an upsell. A typical sliding gate installation in North Hollywood runs $4,000 to $8,500 including the operator.
Swing Gate Installation
Swing gates on North Hollywood bungalows have a particular failure mode: the afternoon heat expands the steel just enough that the gate binds against the latch post, and the operator error-codes out. We install swing gates with a wider high-temperature clearance and use galvanized hinge posts set on new footings when the originals show quake damage. Automated swing gate installation with an operator typically runs $3,200 to $6,800 in North Hollywood.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We install and service Gate Installation equipment from FAAC, BFT, Linear, Viking, and five other major automation brands, so we’re not tied to one manufacturer’s catalog. If your North Hollywood property already has a Linear operator on a pedestrian gate and you want a matching system on a new driveway gate, we can do that. We keep common control boards, safety photocells, and remote sets stocked for North Hollywood jobs, which means less waiting on parts. Our Gate Installation team works on whatever motor is already on the property unless you decide you want to upgrade.
Common Gate Installation Problems We See in North Hollywood Homes
- Afternoon thermal binding: North Hollywood sits in the San Fernando Valley’s thermal core, where summer highs of 105-110°F cause steel and wrought iron gates to expand and bind against posts and tracks by mid-afternoon. A gate with normal clearances at 9 a.m. can be jammed shut by 3 p.m. We set high-temperature clearances on every swing and slide gate we install here.
- Santa Ana wind stress on sliding gates: The fall and winter winds that funnel through the Valley push hard against lighter-gauge sliding gates, bending frames off alignment and snapping welds at the latch post. We specify thicker wall steel and reinforced latch-post welds for North Hollywood installations.
- Northridge quake pillar lean: The 1994 Northridge earthquake epicenter sat roughly five to six miles west of North Hollywood, and plenty of concrete gate pillars and post footings around here still carry hairline cracks from that day. A gate that sags and scrapes often has a perfectly fine hinge set and a crooked pillar underneath it.
- Heat-accelerated operator failure: Automatic gate operator circuit boards and rubber drive components fail faster in North Hollywood’s summer heat than manufacturer specs predict, because those specs were tested in milder climates. We mount operators with ventilation clearance and use heat-rated wiring insulation on our installations here.
Pricing for Gate Installation in North Hollywood, CA
A basic single swing driveway gate in North Hollywood, manually operated, typically runs $1,800 to $3,500 installed. Add an operator and safety edges and you’re at $3,200 to $6,800. Pedestrian gates run $900 to $2,400, depending on whether they’re steel tube or wrought iron, and whether the existing post is sound or needs a new footing. Sliding security gates for apartment buildings and hillside homes start around $4,000 and go to $8,500 with automation.
Two things move the number most: the condition of the existing posts and footings, and whether we need to run new power for an operator. We price the job in writing before work starts, under Haven Standard Clause 1, and we hold that price. No surprise invoice at the end. Call (213) 674-2473 for a free estimate, including a written line-item price.
Learn what the San Fernando Valley’s heat, Santa Ana winds, and Northridge quake legacies specifically do to gate installations in North Hollywood. Those details are on this page, and they’re the reason a gate that works fine in Studio City can fail in NoHo by August.
We Also Serve Cities Near North Hollywood
Our crews cover the neighborhoods around North Hollywood, including Studio City, Van Nuys, Burbank, and Sherman Oaks. If you’re a few blocks over the line, we can still help. See our North Hollywood page for full local service details and coverage.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
That’s thermal expansion. North Hollywood’s summer heat, routinely 105-110°F, expands steel gates by a measurable fraction of an inch, and that’s enough to bind a swing gate against its post. The fix is installing or re-hanging the gate with a high-temperature clearance gap, which accounts for the afternoon expansion instead of assuming the gate will behave the same at noon and at 6 p.m. If the hinge post has a lean from the Northridge quake, that worsens the binding. Call (213) 674-2473 and we’ll measure the clearance at installation.
Santa Ana winds push a sliding gate sideways against its track, and over a season or two that bends light-gauge frames off alignment and can snap the weld at the latch post. Apartment complexes on wide east-west streets see the worst of it. We install slide gates with heavier wall steel and reinforce the latch-post weld specifically because North Hollywood’s fall wind pattern is predictable and harsh.
It often is. North Hollywood’s extreme summer heat accelerates failure of operator circuit boards and wire insulation far faster than the manufacturer’s mild-climate testing would predict, and heat-failed boards are one of the most common calls we get for recently installed gates. We mount operators with ventilation clearance and use heat-rated wiring so the board isn’t baking against a steel box all afternoon. If another company installed it, bring us their written estimate or invoice and we’ll give the repair a free second look.
Yes, and we see it constantly in North Hollywood. The Northridge epicenter was close enough that many concrete gate pillars and post footings around here have hairline cracks or subtle shifts, so the hinge set looks intact while the pillar itself leans just enough to drop the gate. We fix the footing before re-hanging, because installing a fresh gate on a crooked post just transfers the problem. We installed a LiftMaster sliding gate operator on a 1960s ranch off Burbank Boulevard where the gate bound every afternoon; the motor was fine and the original 40-year-old hinge post had the lean. New footing, galvanized post, re-hung gate, and the safety loop and photocells stopped false-triggering within a day.
Galvanized steel posts, stainless fasteners, sealed bearings, and powder-coated frames hold up best in North Hollywood’s temperature swings and dry-wind conditions. Painted hardware rusts faster here once the finish gets a scratch, and unsealed bearings grind out in a couple of desert-dry summers. We spec stainless and galvanized components on every North Hollywood install we do, and the part numbers go in your written record. Call (213) 674-2473 for a written quote on a new gate, and ask us about the Haven Standard documentation we leave on every job.
Written by Adrian Vance, Owner at Vance Gate Repair Los Angeles, serving North Hollywood with written-price gate installation and repair since 2014.