Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Hollywood
Gate repair in North Hollywood usually involves one of three things: a gate that binds against its posts in the afternoon heat, an operator that faults because a pillar shifted during the 1994 Northridge earthquake, or hardware that has simply worn out after 50 or 60 years of daily use. Most repairs we handle in North Hollywood are completed in a single visit, and the price is written down and handed to you before any tool comes off the truck. Call (213) 674-2473 and a live person answers, day or night.
We know the specific failure patterns of gates in this part of the San Fernando Valley, from the cinder block pillars off Burbank Boulevard to the steel swing gates on the ranch homes near Valley Glen. That local knowledge means we diagnose the actual problem, not just the symptom.
Why Vance Gate Repair Los Angeles Is North Hollywood’s Preferred Gate Repair Company
North Hollywood homeowners call us because we show our work. Every visit ends with a written record of what we found, what we adjusted, and what we replaced, along with a photo log of the gate’s condition before and after. That documentation habit comes from Adrian Vance’s commercial access-control background, and it means no future technician ever has to guess what was done to your gate. Under Clause 4 of The Haven Standard, that photo record is included on every job at no additional charge.
We dispatch background-checked, uniformed technicians to North Hollywood addresses with their name and photo provided before arrival. The same tech who diagnoses your gate is the one who fixes it. Response time to most North Hollywood neighborhoods, from the NoHo Arts District to the streets around Valley Plaza Park, is typically within a few hours for emergency work. The written price you receive before work starts is the price you pay, which is why North Hollywood customers with older gates tend to call us instead of a company that quotes verbally and bills differently later.
Our Gate Repair Services in North Hollywood
Electric Gate Repair
Electric gates in North Hollywood fail most often at the control board, the limit switches, or the wiring that runs through underground conduit into the post. Older LA-standard installations used thin-gauge wire that deteriorates faster in Valley heat. We diagnose the electrical fault with meters and readings, not guesswork, and we photograph every setting before we change it. Whether your opener is a FAAC, BFT, Linear, or Viking, our Gate Repair technicians carry the diagnostics for most major brands on the truck.
Automatic Gate Repair
Automatic gate operators in North Hollywood work harder than manufacturers expect because of the 40°F day-night temperature swings and the load of a gate that may not swing true. A gate that’s slightly out of alignment forces the operator to push against resistance on every cycle, which burns out capacitors and strips gears. When we repair an automatic gate in North Hollywood, we fix the mechanical alignment first, then address the operator, because fixing only the motor on a misaligned gate just means the new motor fails the same way the old one did.
Hinge & Post Repair
This is the repair we do most often in North Hollywood, and it’s the one most often missed by other companies. Original wrought iron hinges on 1940s and 1950s gates wear egg-shaped over decades of use, and combined with the 1994 Northridge earthquake’s effect on concrete pillars, you get a gate that sags at the free end and drags on the ground or binds against the post. We reset post footings, weld new hinge barrels where needed, and bring the gate back to level. We’ll tell you honestly when a post is too far gone to save and a new poured footing is the cheaper long-term answer.
Gate Realignment
A North Hollywood gate that swings freely at 8:00 a.m. but binds by 3:00 p.m. is not a lubrication problem. It’s thermal expansion. The steel in a black wrought iron gate in direct Valley sun can reach 160°F, and that heat makes the metal grow just enough to close the clearance gap at the latch post. We realign gates with the thermal expansion factor calculated into the clearance, so the gate works through the hottest part of the day. This is a North Hollywood-specific adjustment that a tech from a coastal city would rarely think to make.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We service nine major gate-automation brands, and on most North Hollywood calls we’re working on FAAC, BFT, Linear, or Viking operators. We don’t steer you toward replacing a motor that can be repaired, and because we stock common parts for these brands, many repairs in North Hollywood are completed the same day. If your operator is a model that’s been discontinued, we’ll tell you what can be retrofitted, what the retrofit costs, and when a new operator is actually the smarter financial choice.
Common Gate Repair Problems We See in North Hollywood Homes
- Thermal binding on swing gates. Mid-afternoon in July, a black steel gate in North Hollywood absorbs enough heat to expand and jam tight against the latch post. The gate needs realignment with proper heat clearance, not just spray lubricant.
- Quake-shifted pillars from 1994. The Northridge epicenter was roughly 5-6 miles from North Hollywood, and many concrete gate pillars still carry a hairline lean. A gate that hangs crooked because the pillar moved will keep destroying hinges, operators, and welds until the footing is reset.
- Santa Ana wind damage on slide gates. The fall and winter winds that funnel through the Valley push hard against lighter-gauge sliding gates, bowing frames off their tracks and snapping welds at the latch post. We see this every season on the older apartment complexes along Lankershim Boulevard and Vineland Avenue.
- Egg-shaped hinge wear on original 1940s-60s gates. The post-WWII bungalows and ranch homes that dominate North Hollywood often still have their original wrought iron gates. Forty-degree day-night temperature swings fatigue the hinge metal over decades, the pin holes wear oval, and the gate sags until it scrapes the driveway.
Pricing for Gate Repair in North Hollywood, CA
We don’t hide our pricing behind a phone call, because the written price before work starts is the entire point of how we operate. That’s Haven Standard Clause 1: have it in writing. For North Hollywood homes, here’s what repairs typically run:
- Gate realignment: $145-$295, depending on whether the hinges are reusable and whether the post needs shimming
- Hinge replacement on a wrought iron swing gate: $185-$420, including welding new barrel hinges and re-hanging the leaf
- Post footing reset (concrete work included): $450-$1,100, depending on post size, access, and whether the gate must be removed and re-hung
- Electric operator diagnostics and repair: $165-$520, depending on the board, limit switch, or wiring fault
- Weld repair on a cracked frame or latch point: $120-$350, depending on the extent of the crack and the thickness of the material
These are North Hollywood market ranges, not national averages. The price you’re quoted is flat, written, and agreed before any work starts. If another company has given you a written estimate, we’ll review it as a free second opinion. Call (213) 674-2473 and tell us what your gate is doing.
We Also Serve Cities Near North Hollywood
If you’re just outside North Hollywood, we serve Gate Repair in North Hollywood and the surrounding areas on a regular basis, including Studio City, Van Nuys, Burbank, and Sherman Oaks. The same written pricing and documented photo record apply on every job, whether the gate is in the NoHo Arts District or a mile over the city line.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Hollywood
Your gate’s steel is thermally expanding in the midday heat. In North Hollywood, summer afternoon temperatures routinely hit 105-110°F, and a dark metal gate sitting in direct sun can reach 160°F, which adds enough length to close the clearance gap at the latch post. The fix is a realignment that accounts for that expansion, not a fresh coat of lubricant. Call (213) 674-2473 and we’ll set the clearance correctly for Valley heat.
In most cases, yes. Photocells, safety edges, and loop detectors can be added to most older operators, as long as the control board has the input terminals to support them. On some pre-1990 operators, the board doesn’t have that capacity, and a board upgrade may be required. We’ll show you the board, show you the terminals, and give you a written price for either path before any work starts.
That’s a real possibility, and it’s one we check on nearly every North Hollywood repair. Many local pillars were subtly shifted by the 1994 Northridge quake, and a gate hanging on a leaning post fights the operator on every cycle. The operator faults because it’s working against resistance that shouldn’t be there. We check post plumb, hinge wear, and track alignment before we ever condemn an operator. Give us a call at (213) 674-2473 and we’ll diagnose the whole assembly, not just the motor.
Santa Ana winds push hard against the broad flat face of a sliding gate, and on lighter-gauge gates on older tracks, that lateral force bows the frame and pulls wheels off the rail. We see the result every fall: bent frames, broken guide rollers, and snapped welds at the latch post. The repair usually involves straightening or welding the frame, then re-setting the track and guide spacing. If you’re in the flatland neighborhoods between Burbank Boulevard and Oxnard Street, you’re in the wind path and should have slide gates checked before the wind season peaks.
Usually it can be saved. Sag at the free end is almost always a hinge problem, not a panel problem. The original hinge barrels on a 1960s gate have worn egg-shaped from sixty years of heat cycles, and the fix is cutting off the old hinges, welding new ones, and re-hanging the leaf level. The panel itself, if the metal is sound and not rusted through, doesn’t need to be replaced. We’ll show you the hinge wear in photos and give you a written choice between repair and replacement with honest numbers for both.
Written by Adrian Vance, Owner at Vance Gate Repair Los Angeles, serving North Hollywood and the surrounding Valley since 2014.
If your North Hollywood gate is binding, sagging, faulting, or just not behaving the way it used to, call (213) 674-2473. A person answers. We’ll schedule a visit, put the price in writing before any work begins, and leave you with a documented record of exactly what was done. Free estimates on every repair, and a 365-Day Done Right Promise on every job we complete.