Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills costs $4,800-$18,500 for a typical driveway gate, and the job often starts with a permit application rather than a post hole. We coordinate directly with Beverly Hills Building & Safety, quote the work in writing before anyone touches a tool, and install operators that match your grade, your pillars, and your existing intercom. Whether you’re replacing a 1990s swing gate on a hillside driveway north of Sunset or hanging a new ornamental iron gate on original masonry south of Wilshire, call (213) 674-2473 and we’ll schedule a free on-site measure.
Why Vance Gate Repair Los Angeles Is Beverly Hills’s Preferred Gate Installation Company
Beverly Hills has one of the highest concentrations of automated estate gates per square mile in the United States. That density creates a specific problem: a huge share of those gates were hung before modern entrapment-protection standards existed, and many are controlled by operators that have been obsolete for a decade. Homeowners here don’t need a generic gate installer-they need Gate Repair in Beverly Hills. They need someone who can look at a 1998 FAAC operator on a 22-percent grade and say honestly whether it’s worth a torque upgrade or whether a new LiftMaster is the cheaper long-term answer.
Adrian Vance built this company in 2014 out of commercial access-control work, where documentation wasn’t optional. That habit carried over to residential gates. Every Beverly Hills installation leaves a written scope, a written price, and a photo record of what was found, what was installed, and what was set. Under Clause 1 of The Haven Standard, you get the price in writing before any work begins. Under Clause 4, you get photographic evidence on every job. No other gate company serving Beverly Hills operates this way.
We dispatch uniformed, background-checked technicians to Beverly Hills with name and photo sent before arrival. A live person answers the phone 24 hours a day, seven days a week. If you send a text at 2 a.m. about a gate that won’t close on Benedict Canyon, a human responds. Not a voicemail loop.
Our Gate Installation Services in Beverly Hills
Swing Gate Installation
Most Beverly Hills estates north of Sunset rely on swing gates, and the grade is the variable that decides operator longevity. A swing gate on a flat lot south of Santa Monica Boulevard needs a standard-duty operator. The same gate on a hillside driveway with a 15-degree pitch needs a torque upgrade or a rack-and-pinion conversion, or the motor burns out in two years instead of twelve. We size operators for the actual grade, not the brochure rating, and we photograph the limit-switch settings before we leave.
Sliding Gate Installation
Sliding gates are common on Beverly Hills properties with short driveway returns where a swing leaf would clip a car or a hedge. The local failure mode is the post footing. Seasonal Santa Ana winds and El Niño soil movement knock shallow footings out of alignment, and the rack drifts until the operator faults. We core-drill deeper footings than code minimums on slide gate posts, and we re-set the rack after the concrete has cured, not before.
Double Gate Installation
Double swing gates are standard on Beverly Hills driveways wide enough for two cars, and they fail in pairs. When one leaf sags, the other binds. We rebuild both leaf hinges to a common plumb line, set both operators to a matched open-close cycle, and re-check the photo-eye alignment across the full travel path. The result is a double gate that opens like one unit instead of two arguing leaves.
Pedestrian Gate Installation
Pedestrian gates in Beverly Hills often match the driveway gate’s design language, which means custom ornamental ironwork and matching operators. We install pedestrian gates that integrate with the same access control system as the main gate, so one keypad or one intercom controls both. If your pedestrian gate is on original masonry pillars, we evaluate the pillar before we hang anything new.
For a complete breakdown of everything we handle, see our Gate Installation service hub. For other angles on this market, our Beverly Hills page covers more of what these gates need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beverly Hills
Beverly Hills gates run on a different mix of equipment than the rest of Los Angeles. We see more Viking Access, FAAC, and BFT operators here because the original estate installers specified European brands, and we see DoorKing and Linear on the mid-century properties south of Sunset. We service all nine major automation brands, and we stock common replacement boards, gear sets, and photo-eyes so we aren’t waiting on a distributor. If your existing operator is one we can retrofit safely, we’ll tell you that before we quote a replacement. We don’t steer customers toward a new motor when a board and a limit-switch reset solves the problem.
Common Gate Installation Problems We See in Beverly Hills Homes
- Original masonry pillars that have shifted. South of Sunset, 1920s and 1930s Spanish Colonial homes often still have their original gate pillars. Decades of soil movement and root pressure leave the hinge posts out of plumb. Hang a new ornamental iron gate on an old post without re-plumbing it, and the gate binds within a season. We re-plumb the post before we re-hang the gate, and we photograph the before-and-after so you can see the correction.
- Legacy operators on steep grades. North of Sunset, the hillside driveways accelerate motor burnout. A 1990s FAAC operator that was rated for a flat lot gets asked to push a 400-pound iron gate up a 15-degree incline twice a day for thirty years. When we replace it, we torque-match the new operator to the actual gate weight and grade. The same gate on a flat lot would take a different motor.
- Santa Ana wind damage to slide tracks. October through December, the winds push debris into slide tracks and strain exposed operators. The real problem is often a post footing poured too shallow for the soil movement on hilltop properties. A new slide gate makes the fault worse if the footing underneath it moves. We evaluate soil and drainage before we pour.
- Intercom and access-control mismatches. Beverly Hills estates often have legacy telephone-entry intercoms and newer video systems wired by separate AV contractors. We install new gate operators that integrate with existing Aiphone, DoorBird, and Verkada systems without voiding low-voltage wiring warranties. That coordination problem is more common here than in any surrounding city.
Pricing for Gate Installation in Beverly Hills, CA
A new single swing gate with an operator on a flat Beverly Hills lot typically runs $5,500-$9,800 installed. A double swing gate with matched operators runs $9,000-$18,500 depending on the ironwork and the operator brand. Slide gate installations run $6,200-$12,500, with the higher range reflecting deeper footings on hillside lots. Pedestrian gates run $2,800-$6,000 including a matching operator. A gate operator replacement alone, when the existing gate is sound, runs $2,200-$4,400 for a Viking, DoorKing, or Linear unit with installation and a written record of the part number installed. The written price you receive before work starts is the price you pay. Call (213) 674-2473 for a free on-site measure and a written estimate.
| Service | Beverly Hills Typical Range |
|---|---|
| Single swing gate + operator | $5,500 - $9,800 |
| Double swing gate + matched operators | $9,000 - $18,500 |
| Slide gate + operator | $6,200 - $12,500 |
| Pedestrian gate + operator | $2,800 - $6,000 |
| Operator replacement only | $2,200 - $4,400 |
Gates run on high-tension springs, loaded hinges, and operators with enough torque to move several hundred pounds of steel. If a spring breaks or a cable snaps, keep clear of the gate path and call a professional. These components are genuinely dangerous, and we don’t advise anyone to attempt a spring re-tension or cable re-threading without proper training and tools.
We Also Serve Cities Near Beverly Hills
Our crews serve Beverly Hills daily and cover the surrounding west side: Gate Installation in Beverly Hills and nearby West Hollywood, Studio City, Culver City, and Sherman Oaks. If you’re in the flats or the hills, call (213) 674-2473 and we’ll schedule a measure.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes. Beverly Hills Building & Safety requires a permit for gate motor replacements, even when the gate itself stays. It’s a step neighboring cities don’t enforce as stringently, but Beverly Hills does. We pull the permit, schedule any required inspection, and handle the paperwork as part of the job. Call (213) 674-2473 and we’ll explain the timeline before you commit to anything.
The fix that lasts is re-plumbing both hinge posts to a common line and re-hanging both leaves, rather than tightening the hinge bolts again. Most sagging double gates in the Beverly Hills hills have posts that drifted over decades of soil movement. We core-drill a deeper footing if the post needs it, set the gate, and photograph the post positions so you have a record of the correction. Call (213) 674-2473 for a written assessment.
In most cases, yes. We match the new operator’s dry-contact inputs to your existing intercom’s relay output and document the wiring before we close the panel. If the existing low-voltage wiring carries a contractor warranty, we work within it rather than cutting it. We flag any conflicts before we start. Call (213) 674-2473 and describe your setup; we’ll tell you what’s involved.
The operator was sized for a flat lot. A 400-pound iron gate on a 15-degree grade needs a torque upgrade or a gear-ratio change that a standard flat-lot operator doesn’t have, and the motor burns out within two years. We size every hillside installation for the actual gate weight and grade, not the brochure. Call (213) 674-2473 for a written quote that matches the operator to the site.
Yes, after we evaluate the pillars. Original 1920s masonry in Beverly Hills often has hidden cracks and internal settlement. If the pillar is structurally sound and in plumb, we hang the new gate on it directly. If it’s shifted or cracked, we re-plumb or reinforce the pillar before the gate goes on. We photograph the condition before and after so you see exactly what we found. Call (213) 674-2473 for a free pillar evaluation and a written estimate.
Written by Adrian Vance, Owner at Vance Gate Repair Los Angeles, serving Beverly Hills since 2014.