Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
Gate access control in Inglewood means working with two very different generations of hardware on the same street. The 1940s-1960s bungalows carry retrofitted 1980s-90s ornamental iron gates with worn keypads and corroded wiring, while the new Hollywood Park developments around SoFi Stadium run modern card readers and video intercoms. Coastal humidity four miles from the Pacific accelerates rust on both. Call (213) 674-2473 and a live person answers, any hour.
Why Inglewood Homes Are Different
Inglewood sits squarely in the marine-layer belt, roughly four to five miles from the coastline. The persistent salt-laden air attacks exposed iron and steel gate components faster than manufacturers’ rated lifespans assume. Hinges, springs, operator gears, and keypad housings corrode noticeably faster here than in drier inland cities like Gardena or Hawthorne just a few miles east.
The housing stock compounds the issue. Most homes are 1940s-1960s stucco bungalows and ranch-style homes on compact lots, retrofitted with security gates in the 1980s and 90s. Those gates are now 30 to 40 years old, and their posts, concrete footings, and hinge welds are reaching end-of-life simultaneously. On blocks near the old Crenshaw corridor and Century Boulevard, many gate posts sit in original shallow concrete pads that have heaved or cracked from tree-root intrusion. The post looks fine while the footing has rotated underneath it, throwing the gate out of plumb. That failure looks like a hinge problem until you dig down.
The Hollywood Park/SoFi Stadium redevelopment layered a second reality onto the same ZIP codes. New luxury apartments and mixed-use buildings run commercial-grade slide and swing gate systems with entirely different parts and service protocols. A technician working Inglewood needs fluency in vintage manual hardware and contemporary automated systems within a single day’s route.
Our Main Inglewood Services
Inglewood homeowners call us most about three things: repairing gates that have failed after decades of coastal exposure, installing new gates on properties where the old one has reached end-of-life, and replacing or servicing motors that have corroded or burned out.
Gate Repair in Inglewood
Most repair calls in Inglewood trace back to rusted hinges, sagging posts, or operators that have been fighting the marine layer for too long. We diagnose the actual failure, not the symptom, then hand you a written price before any work begins. Gate Repair in Inglewood covers swing and slide gates, pedestrian gates, and driveway gates on both vintage and modern systems.
Gate Installation in Inglewood
When an Inglewood gate has rusted through or a post footing has cracked beyond repair, replacement often costs less than repeated patchwork. We measure, order, fabricate, and install with a written scope and price delivered before the first tool comes off the truck. Gate Installation in Inglewood handles single and double swing gates, slide gates, and pedestrian gates matched to the existing fence and post spacing.
Gate Motor & Opener in Inglewood
Coastal humidity shortens operator lifespan in Inglewood more than any other local factor. Gears corrode, limit switches drift, and circuit boards fail from condensation. We service nine major automation brands and replace motors when repair no longer makes financial sense. Gate Motor & Opener in Inglewood covers diagnostics, replacement, and reprogramming on existing systems.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Inglewood
Inglewood’s security-gate culture intensified during the 1980s and 90s, which means thousands of keypads, card readers, and intercom units installed 30 to 40 years ago are now failing from corrosion and obsolete components. The newer Hollywood Park mixed-use developments added a second layer: modern electrified vehicle-access gates requiring entirely different access control protocols. A technician has to be fluent in both. Our Gate Access Control work covers everything from a single keypad on a 1950s bungalow to a card reader system on a new residential complex near SoFi Stadium.
Keypad Entry
Signs you need it
In Inglewood’s humid air, keypads fail most often from corroded internal contacts, cracked membrane faces, or wiring that has oxidized inside the post.
What it costs in Inglewood
Most keypad replacements run $225-$450 depending on the brand and whether the existing wiring can be reused.
How we do it
We test the wiring run first, replace the keypad, reprogram all codes, and photograph the finished install for your record.
Phone Entry
Signs you need it
When the gate won’t dial out or the call quality is too poor to identify a visitor, the phone entry unit or its phone line has usually failed.
What it costs in Inglewood
Phone entry systems run $350-$700 installed, depending on whether it’s a cellular unit or a landline-connected model.
How we do it
We replace or reprogram the unit, test the call path end to end, and hand you a written record of the configuration.
What Gate Access Control Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Keypad replacement | $225-$450 |
| Phone entry system | $350-$700 |
| Video intercom | $450-$900 |
Do you install access control on 1980s-era gates in Inglewood?
Yes. Most Inglewood gates from that era can accept modern keypads and phone entry units with a new mounting plate and rewiring, even if the gate itself is original.
Can the same access system work for a driveway gate and a pedestrian gate?
Often yes, but it requires a coordinated relay setup. Call (213) 674-2473 and we’ll tell you during the call whether your layout supports it.
Gate Parts & Welding in Inglewood
Thirty to forty years of coastal humidity means Inglewood gate hardware corrodes from the inside out. Hinges seize, posts rot at the base, and welds crack under the constant damp. The newer Hollywood Park systems need different parts entirely: commercial slide gate rollers, heavy-duty post brackets, and stainless hardware. Our Gate Parts & Welding service keeps both generations of Inglewood gates working without replacing what can be repaired.
Hinge Replacement
Signs you need it
A gate that drags or squeals in Inglewood usually has a hinge pin that has corroded and seized inside the barrel.
What it costs in Inglewood
Hinge replacement runs $80-$180 per hinge including labor, depending on gate weight and whether we weld or bolt the new hinge in place.
How we do it
We cut or unbolt the old hinge, install a corrosion-resistant replacement, re-level the gate, and photograph the finished work.
Post Replacement
Signs you need it
When a gate post leans or the footing has rotated, the concrete pad underneath has usually cracked from root intrusion or years of moisture in Inglewood soil.
What it costs in Inglewood
Post replacement runs $250-$550 per post with a new concrete footing, depending on post size and whether we can reuse the existing gate leaf.
How we do it
We demo the old post and footing, pour a new pad, set the post true to plumb, and re-hang the gate with new hardware.
What Gate Parts & Welding Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Hinge replacement | $80-$180 per hinge |
| Post replacement | $250-$550 per post |
| Custom welding repair | $150-$400 per repair |
Can you weld a cracked ornamental iron gate in Inglewood?
Yes, in most cases. We assess whether the crack is in the frame or a decorative picket, then weld and grind it smooth before repainting the affected area.
Do you replace just the gate roller on a slide gate?
Yes. Roller replacement is a standard repair on Inglewood slide gates, especially on the newer commercial-style systems near SoFi Stadium. Call (213) 674-2473 for a written price.
Brands We Service in Inglewood
We work on FAAC, BFT, Linear, and Viking operators, plus five other major automation brands. Parts for common models are stocked locally, so most Inglewood repairs don’t wait on a parts shipment. See our brands for the full list.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Keypad replacement | $225-$450 |
| Phone entry system | $350-$700 |
| Video intercom | $450-$900 |
| Hinge replacement | $80-$180 per hinge |
| Post replacement | $250-$550 per post |
| Custom welding repair | $150-$400 per repair |
| Gate roller replacement | $90-$180 per roller |
| Rail repair | $200-$450 |
In Inglewood, the biggest price variables are corrosion depth and post footing condition. Coastal rust can hide behind a painted surface until we cut into it, which is why we give you a written price after inspection, not a guess over the phone.
Every quote is written and handed to you before any work starts. That’s our standard, not an upsell.
Neighborhoods We Serve in Inglewood
We work across Inglewood, from the blocks near the old Crenshaw corridor to the new Hollywood Park developments around SoFi Stadium. Most calls get a same-day or next-day visit, depending on the job.
- Hollywood Park
- Century Heights
- Inglewood Knolls
- North Inglewood
- Morningside Park
Service Area - Cities Near Inglewood
From our Los Angeles office, we dispatch crews to Inglewood and the surrounding cities. We also serve Hawthorne, CA, Culver City, CA, Gardena, CA, and Los Angeles, CA.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Inglewood
A live person answers at (213) 674-2473 any hour, and we dispatch locally. Most Inglewood emergency calls get a same-day visit, often within a few hours depending on where the technician is at that moment.
Most residential gate replacements don’t require a permit in Inglewood, but new automated driveway gates may need to meet safety edge and photo-eye requirements. We’ll tell you what applies to your specific property before any work starts.
Many Inglewood HOAs, especially in the newer Hollywood Park developments, have rules about gate style, height, and access control branding. We work within those requirements and document everything in writing for your HOA file.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.