Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Angeles, CA
Gate access control in Los Angeles means keypads, card readers, phone entry, and video intercoms wired to automated driveway gates on homes built from the 1920s to last month. LA’s combination of steep hillside lots, gated estate culture, and LAFD rapid-entry rules makes this work different from any other market. Call (213) 674-2473 and you’ll get a live person, a written price before any work starts, and a technician who documents every limit-switch reading and wiring change before leaving.
Why Los Angeles Homes Are Different
Los Angeles has one of the highest densities of automated residential driveway gates in any U.S. city. The housing stock runs from 1920s Spanish Colonial estates in Hancock Park and Los Feliz with ornate wrought-iron pedestrian gates hung on hinges set in soft mortar, to post-war stucco tract homes across the San Fernando Valley where original chain-link drive gates are being upgraded to automated steel or aluminum. Hillside properties in Laurel Canyon, Bel Air, and the Hollywood Hills often have driveways pitched at grades too steep for swing gates, so cantilever slide gates are the default, and every service call includes grade-alignment work that flatland homes never need. The intense year-round UV exposure and dry heat degrade gate operator circuit boards, nylon drive gears, and photo-eye sensor lenses faster than in temperate markets, while the coastal marine layer from Santa Monica to Malibu drives salt-air corrosion on steel frames, hinges, and latch hardware that inland cities never see. We work on what’s actually installed, whether it’s a Viking operator on a Silver Lake hillside or a Ghost Controls board in a Valley tract home.
Our Main Los Angeles Services
Los Angeles homeowners call us most often for three things: a gate that won’t open, a gate they want replaced, and an operator that’s stopped responding. Each has its own page with local pricing and details.
Gate Repair in Los Angeles
MostLos Angeles gate repair calls start with a gate that’s sagging, grinding, or refusing to close all the way. We see bent cantilever tracks after Santa Ana wind events, salt-corroded hinges near the coast, and operators burned out from straining against 50 to 70 mph gusts. The fix starts with a written diagnosis and a flat price. Full details are on our Gate Repair in Los Angeles page.
Gate Installation in Los Angeles
New gate installation in Los Angeles means matching the house, whether that’s a steel cantilever slide on a Bel Air grade or an aluminum swing gate on a Hancock Park driveway. LAFD Knox Box requirements apply to automated gates within Fire Hazard Severity Zones, which cover most hillside neighborhoods. We survey, measure, and quote in writing before ordering anything. See Gate Installation in Los Angeles for pricing and scope.
Gate Motor & Opener in Los Angeles
Los Angeles gate motors fail predictably: UV-baked circuit boards, stripped nylon gears, and photo-eyes fogged by marine layer salt. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock spare Viking and LiftMaster operator boards specifically for the fall Santa Ana surge. The Gate Motor & Opener in Los Angeles page covers replacement and repair pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Los Angeles
Gate access control in Los Angeles covers the keypads, card readers, phone entry, and video intercoms that let authorized people in while keeping everyone else out. On homes from the 1920s to the 2020s, we’re usually retrofitting modern hardware onto aging gate frames, and the UV exposure here means component failures happen faster than in coastal or northern markets. This is the same category of work Adrian Vance started with in commercial access control in 2014, applied to residential driveways. See our Gate Access Control hub for the full service breakdown.
Keypad Entry
Signs you need it
Keys get lost, codes get shared, and Los Angeles homeowners with staff, landscapers, or short-term rentals need to change access without rekeying a lock.
What it costs in Los Angeles
Keypad entry in Los Angeles typically runs $180 to $340 for a hardwired unit installed on an existing operator, including programming and a written record of the code scheme.
How we do it
We mount or replace the keypad, run or verify the low-voltage wiring, program codes, and photograph the finished install, leaving you the wiring diagram and code list.
Video Intercom
Signs you need it
You can’t see who’s at the gate before opening, or the existing intercom audio is scratchy and the camera lens is fogged from years of UV and marine layer exposure.
What it costs in Los Angeles
Video intercom systems in Los Angeles generally run $300 to $700 depending on whether we’re replacing a handset, adding a monitor, or running new cable to the house.
How we do it
We replace the camera or handset, verify the signal path, adjust the photo-eye alignment if needed, and photograph the new position and wiring before we leave.
What Gate Access Control Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Keypad entry installed | $180 - $340 |
| Video intercom system | $300 - $700 |
| Phone entry system | $350 - $800 |
Prices are written and agreed before any work starts. Under The Haven Standard Clause 1, you get the number in writing, not a verbal range.
How much does a keypad entry system cost in Los Angeles?
A hardwired keypad on an existing gate operator in Los Angeles runs $180 to $340 including installation and programming. Call (213) 674-2473 for an exact quote. Estimates are free.
Can you install a video intercom the same week?
Usually yes. We keep common intercom parts stocked locally, and most Los Angeles installs are scheduled within a few days. Call (213) 674-2473 and a live person will confirm the schedule.
Gate Parts & Welding in Los Angeles
Gate parts and welding in Los Angeles means replacing the steel, hinges, posts, and rollers that hold a gate up after years of UV, salt air, and Santa Ana racking. The housing stock here spans a century, so we’re often matching new steel to 1920s wrought iron in Hancock Park or fabricating a replacement post for a 1960s Valley chain-link gate. Our Gate Parts & Welding hub covers the full fabrication scope.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground on the latch side, or the hinge bolts wobble in enlarged holes in the post.
What it costs in Los Angeles
Hinge replacement in Los Angeles typically runs $120 to $280 per hinge, including cutting off the old hardware and welding or bolting the new hinge in place.
How we do it
We cut off the failed hinge, grind the post or frame clean, weld or through-bolt the replacement, and photograph the finished weld before we leave.
Post Replacement
Signs you need it
The gate post leans, the pivot is out of travel alignment after rain or seismic settling, or the post base shows cracking and rust bloom.
What it costs in Los Angeles
Post replacement in Los Angeles generally runs $300 to $600 per post, depending on whether we’re core-drilling into concrete or setting a new footing in hillside soil.
How we do it
We cut the old post at grade, dig or core for the new footing, set and brace the new post, then re-hang the gate and photograph the plumb line.
What Gate Parts & Welding Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Hinge replacement | $120 - $280 per hinge |
| Post replacement | $300 - $600 per post |
| Custom welding repair | $150 - $450 per repair |
All welding is done by a trained technician who photographs every weld and leaves a written record of the material and part number.
How much does hinge replacement cost in Los Angeles?
Hinge replacement in Los Angeles runs $120 to $280 per hinge, depending on the hinge type and whether welding is required. Call (213) 674-2473 for a written quote.
Can you weld a cracked gate frame the same visit?
Usually yes. We carry a mobile welding rig and common steel stock, so most cracks and separations get welded the same visit. Call (213) 674-2473 to confirm the schedule.
Brands We Service in Los Angeles
We service Linear, Viking, Ghost Controls, and DoorKing operators daily across Los Angeles, and we keep spare boards and remotes for all four stocked locally. If you have another brand, we work on those too. See our brands for the full list of nine automation brands we service.
Pricing for Gate Repair in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Keypad entry installed | $180 - $340 |
| Video intercom system | $300 - $700 |
| Phone entry system | $350 - $800 |
| Hinge replacement | $120 - $280 per hinge |
| Post replacement | $300 - $600 per post |
| Custom welding repair | $150 - $450 per repair |
| Gate roller replacement | $80 - $180 per roller |
| Rail repair | $150 - $350 per section |
What pushes price up in Los Angeles is hillside access, salt-corrosion cleanup on coastal properties, and the need to match new steel to century-old wrought iron. What does not change is the upfront price. Every job gets a written quote before any work starts, and the 365-Day Done Right Promise covers every repair for a full year.
Neighborhoods We Serve in Los Angeles
We dispatch from our Los Angeles office across the basin and the hills. Most neighborhoods see a technician within a few hours for repair calls, and we schedule installations the same week in most cases.
- Hancock Park
- Los Feliz
- Silver Lake
- Laurel Canyon
- Bel Air
- San Fernando Valley
Service Area - Cities Near Los Angeles
Our Los Angeles crews also cover the surrounding cities where gate work runs into the same UV, salt-air, and Santa Ana conditions. We serve Huntington Park, CA, Gardena, CA, Inglewood, CA, and Hawthorne, CA with the same written-price, documented-record standard.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Most gate repairs and operator replacements on existing gates do not require a permit. New gate installations may require LAFD Knox Box approval if the property sits in a Fire Hazard Severity Zone, which covers most hillside neighborhoods. We verify requirements during the estimate.
For repair calls, yes in most cases. We dispatch from our Los Angeles office and aim for same-day arrival on gate failures. Call (213) 674-2473 and a live person answers 24 hours a day, seven days a week.
Yes. We work with Los Angeles HOAs and property managers on gate hardware, operator replacement, and access control, and we provide the documentation most HOAs require: written scope, written price, and photographic evidence of completed work.
Call (213) 674-2473 for a free estimate on any gate repair, parts, welding, or access control work in Los Angeles. You’ll get a live person, a written price before any work starts, and a documented photo record when the job is done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.