Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Los Angeles Homeowners
Gate repair in Los Angeles typically costs between $185 and $600 for most residential fixes, with motor replacements running $450 to $1,500 depending on the brand and what failed. We complete most repairs same day we arrive, and we hand you a written price before a single tool comes off the truck. That’s how Vance Gate Repair has handled more than 22,000 gates since 2014, and it’s how every job in Los Angeles still gets done. Call (213) 674-2473 any hour – a live person answers.
Key Takeaways
- Written price before work starts – the number on the estimate is the number on the invoice, per Haven Standard Clause 1.
- Same-day service available for most gate failures across Los Angeles.
- Every visit leaves a photo record – what we found, what we set, what we replaced.
- 365-Day Done Right Promise – if the repair isn’t right, we make it right at no charge.
What Our Gate Repair Service Includes
Electric Gate Repair
An electric gate that won’t open, grinds when it moves, or trips the breaker usually points to a problem in the motor circuit, the capacitor, or the control board. We diagnose on site, test voltage at the board and motor leads, and name the failed component before we replace anything. In Los Angeles, we regularly find that a dead capacitor or a corroded board connector is the whole story, and the fix costs a fraction of a full motor replacement. You get a photographed record of every reading we took and every part we installed.
Automatic Gate Repair
Automatic gates add a second layer to the problem: the automation system – limit switches, loop detectors, safety edges, and the receiver that talks to your remote. When a gate stops mid-travel or ignores the remote entirely, the fault is usually a misadjusted limit switch or a photo-eye that drifted out of alignment. We work on all nine major automation brands and we don’t steer you toward replacing a motor when the actual fault is a $12 limit switch. The day we leave, you’ll have the part number and a photo of the new setting in hand.
Hinge & Post Repair
Gate hinges and posts carry the full weight of the gate, and when they sag, the gate drags, the motor strains, and the whole system fights itself. We see this most often in Los Angeles hillside neighborhoods where soil settles and posts lean over time. Our repair is straightforward: we realign or replace the hinge, pull the post back to plumb where the footing allows, and photograph the finished alignment. If the post is too far gone, we tell you before we touch anything and hand you a written price for the replacement.
Gate Realignment
A gate that scrapes the ground, latches hard, or leaves a gap at the striker has alignment problems. We check the gate’s weight on its hinges, measure the gap at the latch, and correct the angle so the gate travels cleanly through its full arc. In Brentwood and Sherman Oaks, we routinely find that years of automatic opening have wallowed out the hinge hardware just enough to throw the whole leaf off. Realignment is often the same-day fix that saves you from buying a new gate entirely.
Lock Repair
Gate locks fail in two ways: the mechanical lock wears, or the electric strike stops releasing when you press the button. We replace broken cylinders, repair or install electric strikes, and make sure the lock actually latches when the gate closes behind you. A lock that doesn’t fully engage leaves your property open even when the gate looks closed – that’s worth fixing the day you notice it. If your lock is paired with an access-control keypad or intercom, we test the whole release sequence before we leave.
Weld & Rust Repair
Steel gates rust from the bottom up, and in coastal air like Venice or Playa del Rey, the salt accelerates it. We grind out rust, weld reinforcement where the frame has thinned, and repaint the repair so it doesn’t become the next rust point. A gate with rust at the hinge welds is a future failure waiting to happen, because that’s where the load concentrates. We’d rather weld a reinforcement plate now than replace the gate in two years, and our written price tells you which route actually costs less.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterBrands We Service for Gate Repair
We repair Viking operators most often on estate-style Los Angeles gates, where the big solar or AC-powered rams have a reputation for working hard and needing disciplined limit-switch maintenance. We stock Viking-compatible control boards and remote receivers, and we keep a library of the factory wiring diagrams on hand so troubleshooting is fast and honest.
We also service a steady stream of Ghost Controls kits on lighter gates and driveway arms – we see them throughout Los Feliz and Studio City – and we fix DoorKing operators on apartment and condo gates in Culver City and Inglewood. Ghost Controls kits are DIY-friendly to install but the limit settings and the photo-eye wiring still have to be exactly right or the gate reverses mid-travel. DoorKing systems often sit on commercial-grade duty cycles, and we treat them accordingly. Whether you have a Culver City gate running DoorKing or a Venice driveway gate on Ghost Controls, we can service it without pushing you toward a replacement.
Signs You Need Gate Repair Right Now
- The gate grinds, squeals, or jerks while moving. This is usually a failing hinge bearing or a drive chain that’s stretched beyond spec. Every cycle makes it worse, and the motor is absorbing the extra load.
- The gate stops halfway or reverses for no reason. This almost always points to a photo-eye (the infrared beam that stops the gate when something crosses the path) out of alignment, or a limit switch set past travel. Both are quick fixes when diagnosed correctly.
- The remote works only at very close range. The receiver antenna may be fatigued, the remote battery dying, or the receiver board itself losing sensitivity. In Los Angeles, where every house has dozens of competing signals, range problems are common and usually repairable without replacing the motor.
- The gate sags or drags on the ground. Sag means hinge wear or a settling post, and a dragging gate destroys itself and the motor together. The sooner it’s realigned, the smaller the repair bill.
- You can see rust at the welds or along the bottom rail. Rust at load-bearing points is a break waiting to happen. Coastal Los Angeles – Culver City, Venice, Playa del Rey – accelerates this by years compared to inland homes.
Our Gate Repair Process - Step by Step
1. You Call, a Person Answers
Call (213) 674-2473 any hour. A live person answers – no voicemail loop, no callback queue. We ask what the gate is doing and schedule a visit that works for you, usually same-day in Los Angeles for urgent failures.
2. On-Site Diagnosis with Instruments
The technician tests voltage at the board and motor, checks limit-switch positions, and examines the hinges, chain, and sensing edges. We don’t guess at what failed – we measure it. Every reading gets written down.
3. Written Price Before Work Begins
Before any repair starts, you get a written price. That’s Haven Standard Clause 1 – a flat number, in writing, handed over before the first tool comes off the truck. If the scope changes, the price changes in writing first. No exceptions.
4. The Repair, Done Right
We make the repair, then test the full travel cycle, the safety sensors, and the remote range. No job is considered finished until the gate has passed a complete open-close-open sequence under our eyes.
5. Photo Log and Written Record Left With You
Before we leave, you get a documented photo record of what we found, what we adjusted, and what part went in. The same record gets filed in our system, so when a future technician opens your job file, the history is already there. That’s Haven Standard Clause 4: evidence on every job.
How Much Does Gate Repair Cost in Los Angeles?
Most residential gate repairs in Los Angeles run between $185 and $600. A misaligned photo-eye or a failed transmitter capacitor lands on the low end. Hinge replacement or a broken drive chain sits mid-range. Motor replacements run $450 to $1,500, depending on the brand and whether the arm bracket and mounting plate survived the failure.
What moves the price: the weight of the gate, the brand of the opener, how much detail the install leaves to work around, and whether the problem damaged secondary components. What doesn’t move the price: the time of day you call. We don’t charge extra for nights or weekends, and a live person answers 24/7. Every estimate is free, written, and final before work starts. If you’re holding another company’s written estimate, bring it in – we’ll review it at no cost as a second opinion.
Gate Repair Near Los Angeles - Our Service Area
We dispatch daily across Los Angeles, Culver City, Venice, Santa Monica, Beverly Hills, Brentwood, West Hollywood, Inglewood, Hawthorne, Studio City, Los Feliz, and Sherman Oaks. Most metro calls see a technician the same day, and we schedule precise windows so you’re not waiting on a four-hour arrival span. If your gate is failed open or failed shut – meaning your property is either exposed or trapped – tell the person on the phone and we’ll prioritize the dispatch.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Los Angeles
Gate repair is diagnosis and correction of any failure that stops a gate from opening, closing, latching, or waiting safely. That includes the motor circuit, the control board, the hinges and posts, the lock, the safety sensors, and the welds. We tell you what failed, in trade language, then explain it in plain English before we fix it.
Most residential gate repairs are completed the same day. A limit-switch adjustment or a photo-eye realignment is often a 30-minute fix. Motor or board replacements can run longer if we need to source a specific part, but common brands like Viking, DoorKing, and Ghost Controls are usually in stock locally or on our truck. You’ll know the timeline before we begin.
Most repairs cost between $185 and $600, and motor replacements run $450 to $1,500 depending on brand and damage. The exact number gets handed to you in writing before any work starts – not after – under Haven Standard Clause 1. Estimates are free. Call (213) 674-2473 and we’ll give you a firm written number.
Yes. We regularly repair Viking, DoorKing, Ghost Controls, and six other major automation brands, and we stock common parts and OEM-compatible replacements for all three. We can usually test the output of your existing board on site to determine whether the motor or the control system failed. If you own one of those brands, call us before you buy a replacement – it’s often a repairable component.
Yes. A live person answers 24/7 at (213) 674-2473, and we dispatch for failed-open gates the same day. No voicemail, no answering service, no “we’ll call you back within 48 hours.” If your gate jammed open, your property stayed open overnight, and that needs to be handled today.
Every repair we complete is covered by our 365-Day Done Right Promise. If the repair is not right, we make it right – no argument, no fee, and no expiration date within that year. Under the Haven Standard, our name is attached to the work, in writing, for the life of the job record.
Clear any debris or vehicles near the gate’s travel path so the technician can run the full open-close sequence. If the gate opens via an access code, enter it into the keypad and test it once. And if you have a photo log from a previous repair, keep it handy – it saves us time and gives us a baseline to compare against.
Schedule Your Gate Repair Service in Los Angeles Today
Call (213) 674-2473 now and a live person will answer. We’ll schedule the visit, diagnose the failure on site, hand you a written price, and leave you with a photographed record of the repair. Free estimate, no obligation, and a written price before any work begins. That’s the Vance Gate Repair Los Angeles standard.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Los Angeles since 2014.